The Rhino-Rack RS 2500 Roof Rack for Naked Roofs # RRRS143 is designed to fit a Ford Ranger and it won't fit your 2019 GMC Sierra 1500. Instead you'll need to use the Vortex kit which includes:
59" Rhino-Rack Vortex Crossbar - # RRVA150S
Rhino-Rack 2500 Legs - # RRRLKVAH
DK Fit Kit - # DK427H
This gives you a 1 bar roof rack system that can then be paired with a ladder rack like the Buyer's Products # 3371501680 or a T-Load Assist # RTL002. view full answer...
The Firestone Ride-Rite Air Helper Springs # F2609 is the only kit that we have that will fit your 2020 GMC Sierra 1500 Denali with the adaptive ride control. These have a 5,000lb capacity to enhance your factory suspension under load. This will not increase your payload or towing capabilities.
I recommend the Air Lift WirelessAIR Compressor System # AL74000EZ to control the air pressure in the air bags. This system allows you to control the air pressure from either the wireless remote... view full answer...
Timbren has a suspension kit that was specifically designed to fit your 2017 GMC Sierra Denali with MagneRide suspension. For that you'd want the part # TGMRCK15MR which will give you the rear suspension support you are looking for. It also has the advantage of not requiring maintaining air pressure or running air lines to install like the air bag kits. view full answer...
Yes, we have the B&W Tow & Stow 2-Ball Mount # BW29FR that is capable of a 4-1/2" drop. This fits your 2" receiver like the B&W Tow & Stow 2-Ball Mount # BW44FR you found and will allow you to use it with your MultiPro tailgate. It will also work with the MultiFlex tailgates on Chevrolet trucks.
I do recommend swapping out the pins for the InfiniteRule Locking Pins # 34061775-D. This will ensure that your hitch is secure and the stainless steel locks will not corrode. view full answer...
Thule does offer a TracRac Cantilever Extension for a full sized truck. If you have a TracRac SR, G2 or T-Rac Pro2 manuactured after 2011, the # TH24002XT is what you'd need.
I've linked you to an installation video that you might find helpful. view full answer...
The Demco Hijacker Autoslide 5th Wheel Trailer Hitch, # DM8550040 has a fore/aft travel of 22-1/2" and is about the only option for your 2017 GMC Sierra 1500 with a 5-1/2 foot bed.
You will need a fifth wheel rail kit too for installation, the Demco Custom Install kit, # DM8552027-71 is made specifically for this truck.
You may also want the Curt 5th Wheel/Gooseneck Custom Wiring Harness, # C56070. Mount this 7-way, RV-style connector in your truck bed for quick, simple hookup of your... view full answer...
Yes, the Roadmaster Rear Anti-Sway Bar, # RM-1109-169 will help in this area. This will help to minimizes side-to-side movement and improve overall stability of your vehicle, diminishing the effects of crosswinds and passing vehicles.
If the manufacturer is stating that you can not use a a weight distribution type hitch with your trailer see if the Curt Friction Sway Control, # 17200 is compatible. this comes with mounting plate or you can use the Curt Ball Mount w/ Sway Control Tab... view full answer...
Yes your truck would need to have a brake controller installed in it to activate the self adjusting brakes of your trailer.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.
To install the controller... view full answer...
A two stage regulator will prevent the cavitation you are experiencing with the single stage part # 37207-30325 that you referenced. So for that you'd want the part # 108221. view full answer...
All you need to install the Prodigy P3 brake controller is the part # 3016. Your 2015 GMC Sierra 1500 has a factory 7-way trailer connector installed on it already and this harness will connect everything needed to allow the p3 to work. view full answer...
The Tekonsha Plug-In Wiring Adapter for the Sierra 1500 is part # 3064-P. This adapter is fitted for your 2019 GMC Sierra 1500.
This adapter allows for easy installation of the Tekonsha P3 Trailer Brake Controller, part # 90195, on your Sierra. I've linked to a video installation of this combination on a 2016 Sierra 1500.
Keep in mind that in order for you to use a brake controller correctly, you will need a 7-way harness on your vehicle. If you only have a 4-way, I recommend the etrailer... view full answer...
I may have a solution for you, but unfortunately there is not a tonneau cover that's going to work with a toolbox that small; the only option available to fit a tool box is the Access Toolbox Edition Soft, Roll-Up Tonneau Cover # A62329 which fits with 19"-21" wide tool boxes that extend over the sides of the truck bed. This particular cover would not be compatible with a 12" wide tool box.
With that said, if you wanted to go with a tonneau cover like the BAK Revolver X2 # BAK39121 and... view full answer...
The Thule TracRac SR Sliding Truck Bed Ladder Rack # TH43002XT-782 is only available with the silver uprights and crossbars. This system is a fit for your 2020 GMC Sierra 1500 with the 5-3/4' bed.
If the black ladder rack color is something that you want over the functionality of the TracRac SR let me know and I can recommend some other options that do come in black. The only issue is they don't work the same way as the SR and they don't have that height of a weight rating either. view full answer...
A Revolution pin box has a rotating turret that allows better turning clearance by shifting the 5th wheel trailer pivot point back from the king pin to the turret, 22-inches to the rear. We do have cushioned versions of this type of pivoting pin box that you can see on the linked page. Three such items are available as replacements for specific OEM pin boxes and these are known as 5th Airborne Sidewinders. All are rated for 16K.
Each unit is a replacement for one or more specific pin boxes;... view full answer...
The Superchips Flashpaq F5 Performance Tuner, # SU2845 that you linked to is not for the 2018 GMC Sierra 1500. However, the Superchips Flashpaq F5 Performance Tuner, # SU2847 will work for the 2018 GMC Sierra 1500 with a 4.3 liter V6 engine or the 5.3L and 6.2L V8 engine options. This tuner offers several power levels and user-tunable options so you can get the most out of your engine including raising the stock speed limit setting.
Please note the linked product review video below. view full answer...
We have bed mats for the 2014 GMC Sierra 5-1/2 foot beds, 6-1/2 foot beds and 8 foot beds. There are models for trucks that have the cargo management systems and others for those that do not have the cargo management system.
If by standard you mean 8 foot without the cargo management system then you would use # DZ86974 or # BMC07LBS.
I have included a link to all of the options for you. Be sure to choose the bed length and style from the drop down menu where is says Select Vehicle Style... view full answer...
The Firestone Ride-Rite all in one kit 2844 is a combination of the Air Helper Springs # F2609 and Compressor Kit # F2610. These are confirmed to fit your 2024 GMC Sierra 1500 4wd with no adaptive ride control. view full answer...
Yes, you can use Demco 5th wheel installation kit # DM8553014-12 in your 2017 GMC Sierra 1500 with 6-1/2-foot bed to install their 16K sliding hitch # DM6076SL-16K. For an in-bed wiring harness you can use part # DM8555002 which is a plug-in item that requires no splicing. Instructions for the hitch and install kit are linked for reference along with a video. view full answer...
You can replace the air springs of the Air Lift kit you have on your 2015 GMC Sierra 1500 with the part # AL84290 which has the internal jounce spring like you are wanting. view full answer...